Cake Central › Cake Forums › Cake Talk › Cake Decorating › For those who custom cut their cake boards in wood
New Posts  All Forums:Forum Nav:

For those who custom cut their cake boards in wood

post #1 of 8
Thread Starter 

What type of wood do you use?  I have a life size guitar cake due next weekend.  I'm using foamcore for the board under the cake, but I need to get a board cut at Home Depot for the whole cake to sit on.  Recommendations?  I was thinking 1/2" plywood, but I don't know.

 

Thanks!

post #2 of 8
Jessicakes did a perfect one. You can google her she's really gracious about answering questions.
post #3 of 8
I typically will use 1/2" plywood. Sometimes, I'll use 1/4", but only for smaller cakes. Definitely go 1/2" for your guitar. I did a guitar a few months ago, and there was too much flex through the neck of the guitar with 1/4". I had to layer another board under it to fully stabilize it.
post #4 of 8
Thread Starter 

Thanks for the advice!
 

post #5 of 8

I use 1/2" particle board because it is easier to cut with a jigsaw in all directions - it doesn't have a grain, and it doesn't have splintery edges.  1/2" has been plenty strong enough for all my cakes so far, and gives a nice edge for a ribbon.  

I'd rather be baking!
Reply
I'd rather be baking!
Reply
post #6 of 8
Thread Starter 

Thanks!

 

Dumb question, but I can get that at Home Depot?

post #7 of 8

If you need it to be Light, cut the board out of half inch foamcore.  If you need a heavier board I would recommend MDF.  Yes, you can get it at Home Depot.  You can cut it into a guitar shape with a jig saw and MDF doesn't splinter.

post #8 of 8
Thread Starter 

Thanks. :)

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Cake Decorating
Cake Central › Cake Forums › Cake Talk › Cake Decorating › For those who custom cut their cake boards in wood