Cake Central › Cake Forums › Cake Talk › Cake Decorating › How to stack a 4 tier wedding cake?
New Posts  All Forums:Forum Nav:

How to stack a 4 tier wedding cake?

post #1 of 13
Thread Starter 
Hi everyone, I am going to be constructing a 4 tier wedding cake with butter-cream Frosting. I am new to the whole stacking idea and this is my first wedding cake. I am in need of some help with how to stack the cake so it is level, and supported! I am also going to have to deliver the cake fully constructed. So please anyone with any ideas or suggestions please reply!
Thanks a lot
Jamie icon_smile.gif
post #2 of 13
you should look in to using SPS system - Read about it here: http://cakecentral.com/cake-decorating-ftopict-603925.html

a 4-tiered cake is going to be VERY heavy, be sure you can handle carrying it fully constructed or be sure you have help with steady hands. icon_smile.gif

Good Luck!
post #3 of 13
post #4 of 13
Make sure you have the cake on a good board, about 3/4-inch subfloor. Fortunately I have hubby for that department. I buy the board and he cuts out the shape and size I need. I have them in different sizes for weddings and giant sheet cakes.

As for the physics of it, you should find some videos or so, it is tedious to put them together and stack, and four tiers is big for your first. Leave yourself lots of time so you aren't rushed.

Tami icon_smile.gif
Always put your eggs in one basket.......why do you want to carry two?
Reply
Always put your eggs in one basket.......why do you want to carry two?
Reply
post #5 of 13
Make sure your cake is very cold and your buttercream hard before stacking so as to minimize the damage at the base of the cake when moving it. Mark where your tier should be on the cake. I center a cake pan on top of the bottom tier and draw a circle around it with a fondant tool to create a guide to place the cake.

If I am ever on life support, unplug me...

Then plug me back in.  See if that works!

Reply

If I am ever on life support, unplug me...

Then plug me back in.  See if that works!

Reply
post #6 of 13
Since this is your first, let's get you started on solid ground by using SPS. As I always say, it's cheap, easy and sturdy. What more could you want?
Answers to the most often asked questions re: SPS. SPS instructions are on Page 15 of the Sticky at the top of the Cake Decorating Forum. Supplies can be ordered from Oasis Supply, Global or BakeryCrafts.
Reply
Answers to the most often asked questions re: SPS. SPS instructions are on Page 15 of the Sticky at the top of the Cake Decorating Forum. Supplies can be ordered from Oasis Supply, Global or BakeryCrafts.
Reply
post #7 of 13
Thread Starter 
Thank you, all of you for posting. But what is a SPS system? Sorry if that is a stupid question...
post #8 of 13
I have not used the SPS system. I've read about it and watch clips about it but have opted to use the cakestacker system and charge a deposit on it. We moved a 5 tier "Lady Windemere" style cake last month with no problems. Well, can't say no problems....we had to enlist extra help to move it! It was HEAVY! It had 6-6" cakes on the bottom, then a 12,10,8 & 6 on top of that.
post #9 of 13
Just recently transported a fully assembled 4-tier square using SPS, and it was no sweat. For anything over 2 tiers, I use SPS. It's totally worth the small extra cost. And I get it back, so I'm able to use it at least twice.
post #10 of 13
Thread Starter 
The Cake I am doing is for this friday, I plan to use the SPS system, but what all do i need for that? I am going to be buying this at hobby lobby and i don't think it comes in a kit. Can anyone tell me what all i would need. I know i need a cake plate for each layer, and four plastic dowels for each layer, but is there some kind of connector? Or Would i still need to put a wooden dowel through all four layers?
Thanks icon_smile.gif
post #11 of 13
SPS (single plate separators)... read the signature line on the post by leah_s.
post #12 of 13
Can you use the SPS for a Lady Windermere style cake?
post #13 of 13
JLynn88,
Based on 4" tall tiers - Yes, you simply need an SPS plate for each tier and the necessary number of dowels. The dowels fit right in with no separate connector pieces.

You also need you standard cardboard round for under each tier.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Cake Decorating
Cake Central › Cake Forums › Cake Talk › Cake Decorating › How to stack a 4 tier wedding cake?